EasyManua.ls Logo

Napa Carlyle Tools 791-6460 - User Manual

Napa Carlyle Tools 791-6460
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
791-6460 Rev. 04/07/20
791-6460791-6460
Capacity ....................................................2 Ton
Low Height ...................................................3.4"
High Height .................................................18.5"
Handle Length ...............................................47.6"
Overall Length ...............................................27.8"
Overall Width ................................................13.3"
Saddle Diameter...............................................4.8"
Weight .................................................. 45.2 lbs.
SPECIFICATIONS
791-6460
2 TON ALUMINUM SERVICE JACK
S
A
F
E
T
Y
S
T
A
N
D
A
R
D
C
O
M
P
L
I
E
S
I
T
H
W
ASME PASE-2019

Questions and Answers

  • B
    Brooke HansonAug 5, 2025
    What to do if my Napa Carlyle Tools 791-6460 Jacks unit will not lift the rated load?
    • J
      James JohnsonAug 5, 2025
      If your Napa Jacks unit isn't lifting the rated load, you should purge air from the hydraulic system. Follow the procedure outlined under the SETUP section to complete this process.
  • M
    Michael KramerAug 12, 2025
    Why does my Napa Carlyle Tools 791-6460 Jacks feel spongy or not sustain the rated load?
    • J
      Joseph JimenezAug 12, 2025
      If your Napa Jacks unit feels spongy or fails to sustain the rated load, it's likely due to air in the hydraulic system. Purge the air from the hydraulic system by following the procedure described in the SETUP section.
  • B
    Brianna SmithAug 20, 2025
    How to fix a Napa Carlyle Tools 791-6460 unit that will not lift to full height?
    • S
      Sally WardAug 20, 2025
      If your Napa Jacks unit isn't lifting to its full height, it may be caused by air trapped in the hydraulic system. Bleed the hydraulic system by following the procedure detailed under SETUP.
  • A
    Austin BennettAug 29, 2025
    What to do if the handle raises up on Napa Carlyle Tools 791-6460 under load?
    • B
      boydcatherineAug 29, 2025
      If the handle of your Napa Jacks tends to raise up while the unit is under a rated load, rapidly pump the handle several times. This action helps push oil past the ball valves within the power unit, resolving the issue.

Summary

Product Specifications

Key Jack Specifications

Details capacity, heights, length, width, and weight of the 2-ton aluminum service jack.

Safety Warnings and Hazard Avoidance

General Safety Alert Information

Explains safety alert symbols and general warnings for potential injury hazards.

Methods to Avoid Hazardous Situations

Provides essential precautions and methods to prevent accidents during jack operation.

Jack Setup and Operation

Assembly and Air Purging Procedure

Step-by-step guide for assembling the handle and purging air from the hydraulic system.

Safe Lifting and Lowering Procedures

Instructions for raising/lowering loads, using jack stands, and avoiding hazards.

Preventative Maintenance Overview

Hydraulic Jack Maintenance Guide

Regular Maintenance Tasks

Details monthly or as-needed lubrication, cleaning, and tightening of components.

Component Identification for Maintenance

Diagram illustrating key components for lubrication and general maintenance checks.

Inspection, Storage, and Troubleshooting

Pre-Use Inspection and Proper Storage

Covers requirements for inspecting the jack before each use and recommendations for storage.

Troubleshooting Common Issues

Lists common problems and their corrective actions, often related to hydraulic system performance.

Owner Responsibility and Warranty Information

Parts Identification and List

Exploded View Diagram of Jack Components

Illustrates the jack's components with corresponding part numbers for reference.

Comprehensive Component Parts List

Provides a detailed list of all parts, their descriptions, quantities, and purchasable items.

Napa Carlyle Tools 791-6460 Specifications

General IconGeneral
BrandNapa
ModelCarlyle Tools 791-6460
CategoryJacks
LanguageEnglish

Related product manuals