NAPCO EXPRESS Series User Manual

7
Emergency Buttons
The three sets of emergency buttons, if programmed, are always active whether the system is armed
or disarmed. Discuss these Buttons with your installer. The emergency signal will only be activated
when the two respective buttons are pressed at the same time.
Fire Alarm: Simultaneously press
E+E to sound a fire alarm, and to alert the central station of a
fire emergency, if so programmed.
Auxiliary Alarm:
Simultaneously press
F+F to alert the central station of an auxiliary emergency,
if so programmed. (The nature of this emergency alarm is to be determined by the installer)
Police Emergency: Simultaneously press
G
+
G
to sound a police emergency alarm, and to alert
the central station of a fire emergency, if so programmed.
Emergency Conditions
E F G
E F G
E Fire
e Emergency
Enabled?
Yes
F Auxiliary
F Emergency
Enabled?
Yes
Ambush Alarm
In the event that you are forced by an intruder to disarm your system, the "ambush alarm" can be acti-
vated. Disarming the system with the Ambush Code will cause the system to appear to disarm nor-
mally--however, a silent ambush alarm signal will be sent to the Central Station. If your system has
the Ambush feature enabled, the code assigned as the User 6 code will function as your Ambush
Code.
G Police
G Emergency
Enabled?
Yes
Ambush
Alarm
Enabled?
Yes

NAPCO EXPRESS Series Specifications

General

Brand	NAPCO
Model	EXPRESS Series
Category	Security System
Language	English