To Next PageTo Next Page
Need help?Do you have a question about the NAPCO GEMINI GEMC-32 and is the answer not in the manual?
General| Zones | 32 |
|---|---|
| Partitions | 2 |
| Keypads Supported | Up to 8 |
| Communication | Built-in digital communicator |
| Input Voltage | 16.5VAC |
| Memory | Non-volatile |
| Type | Control Panel |
| Keypad Compatibility | NAPCO Gemini Keypads |
| Power Supply | 16.5VAC |
| Battery Backup | 12V, 7Ah battery |
Explains the distinction between locked and unlocked accounts in Quickloader for programming.
Describes the process of locking and unlocking Quickloader accounts for programming.
Discusses the UL 864 requirement for control panel programming validation.
Provides steps for testing the system after installation, including Fire Test Mode.
Details the Master Security Code and Dealer Keypad Program Code functions.
Explains Fire User, Burg User, Download Security, and Ambush Codes.
Details methods for downloading programs from a computer.
Explains programming using the keypad's easy menu interface.
Describes direct address programming via keypad for advanced configuration.
Allows dealers to change system programming.
Preliminary info on dealer programming and how to access it.
Guides on configuring a custom default program for new panels.
Covers keypad codes, ambush codes, and dealer security code settings.
Enters subscriber ID numbers for opening/closing and event reporting for Telco 1 and 2.
Enters subscriber ID numbers for opening/closing and event reporting for Telco 3.
Configures area and system reporting options like disable reports and system report options.
Maps zone numbers to specific reporting codes based on zone type.
Continues mapping zone numbers to specific reporting codes.
Configures user opening/closing telco reporting for users 1-96.
Configures user opening/closing telco reporting for users 97-195.
