Need help?Do you have a question about the NAPCO GEM-P800 and is the answer not in the manual?
General| Power Supply | 16.5VAC, 40VA transformer |
|---|---|
| Event Log | Up to 128 events |
| Input Voltage | 16.5VAC |
| Type | Alarm Control Panel |
| Zones | 8 hardwired zones |
| Partitions | 2 |
| Users | Up to 48 |
| Battery Backup | 12VDC, 7AH rechargeable battery |
| Outputs | 2 programmable outputs |
| Memory | Non-volatile |
| Weight | Approximately 5 lbs |
Lists the specific features of the GEM-P800 control panel.
Lists the specific features of the GEM-P800 communicator.
Describes panel reset procedures and keypad setup.
Explains local and remote downloading processes.
Instructions for physically installing the panel and keypad.
Details on grounding, power, and telephone line connections.
Details on wiring burglary, fire, and PGM zones.
Covers system arming, disarming, and related modes.
Instructions for entering and using user programming mode.
Covers entering, programming, deleting, and exiting user modes.
Configures callback number, ring count, and downloading features.
Sets dealer code, user 1 code, and dealer options.
To Next Page