7
%DFNXS 7HOHSKRQH 3URJUDPPLQJ 3DJHU 3URJUDPPLQJ
47
Leading Digits
48
Trailing Digits
(0) (0) (0) (0)
*(C)
*See Note 1
Dialing Prefix for Telco 1, Telco 2
& Telco 3.
40
Subscriber ID Number (Telco 2)
41
Telephone Number 2
[1] Ademco Slow
[2] Radionics Slow
[3] Silent Kni
h Speed
[5] Reserved
[6] Point ID
[7] Pa
er
42
Receiver Format
(4)
44
Dialing Prefix
C = TouchTone #. This is the t
stems. Recommended, but ma
.
N
OTE
1:
Default
OFF
OFF
ON
OFF
43
Receiver Options
Zn 1 LED ON = 2300 Hz Handshake/Kissoff
Zn 2 LED ON = Sumcheck
Zn 3 LED ON = Sin
it
Zn 4 LED ON = No Handshake
Default
ON
OFF
ON
OFF
45
Communicator Features 1
Zn 1 LED ON = Communicator Enabled
Zn 2 LED ON = DTMF w/ Rotary Back up
Zn 3 LED ON = DTMF only
Zn 4 LED ON = Backup to Telco 2
Default
OFF
OFF
OFF
OFF
46
Communicator Features 2
Zn 1 LED ON = No Dial Tone Detection
Zn 2 LED ON = 2:1 Rotary Dialin
Zn 3 LED ON =
Backup if < 4 attempts
Zn 4 LED ON = Reserved
Default
OFF
OFF
OFF
OFF
49
Pager Option
Zn 1 LED ON = Skip Alarm Data
Zn 2 LED ON = Reserved
Zn 3 LED ON =
Reserved
Zn 4 LED ON = Reserved
N
OTE
:
A fixed
Dial Tone Detection (E) is included prior to the
Dialing Prefix
(Block
Number 44)
.
Pro
an E is not required for
Telco 1, Telco 2 and
Telco 3. If dial tone detection is not desired select
No Dial Tone Detection
in
Communicator Features (Block Number 46). Pro
ram a D if a 4 second
dela
is required.
Wi847c
page 7
Tuesday, September 16, 1997 08:35