Napoleon Wolf Steel Silhouette User Manual

FRENCH
PG. 31
W415-2899 / A / 10.07.20
ADD MANUAL TITLE
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030
Phone 1 (866) 820-8686 • www.napoleon.com • hearth@napoleon.com
INSTALLER:
Leave this manual with the appliance
CONSUMER:
Retain this manual for future reference
Product Name / Code
(MUST use title from Price Book)
ADD ____ ILLUSTRATED
ADD PRODUCT IMAGE
SAFETY INFORMATION
GENERAL INFORMATION
These installation instructions must be used in
conjunction with the appliance and appropriate
terminal kit installation instructions. Clearances
listed in these instructions supersede those in
the appliance’s installation instructions.
Selecting and installing the appliance
When installing the Silhouette Terminal,
take into consideration the fi nish material
requirements and follow the relevant installation
instructions set out in this manual.
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
WARNING
!
ENGLISH
$10.00
“FOR INDOOR USE ONLY” OR OTHER
APPLICABLE COMMENT
FOR USE ONLY WITH APPROVED
4” / 7” AND 5” / 8”
DIRECT VENT GAS APPLIANCES
ST47U / ST58U-1
INSTALLATION
MANUAL
Silhouette Terminal
ST58U-1 illustrated
HORIZONTAL TERMINATION ONLY

Napoleon Wolf Steel Silhouette Specifications

General

Brand	Napoleon
Model	Wolf Steel Silhouette
Category	Fireplace Accessories
Language	English

Summary

General Information

Installation Overview

Provides an overview of installation steps and general warnings for the terminal.

List of Certified Appliances

Lists compatible gas appliances that can be used with the Silhouette Terminal.

Installation Planning

Installation Options

Details different methods for installing the terminal based on exterior finish materials.

Terminal Overview

Describes the components of the Silhouette Terminal and highlights key warnings.

Terminal Dimensions

Provides specific size specifications for the 4"/7" and 5"/8" Silhouette Terminals.

Terminal Kit Components

Lists the individual parts included in the Silhouette Terminal kit.

Standoff Dimensions

Provides size specifications for the standard standoff kits for 4"/7" and 5"/8" terminals.

Brick Standoff Dimensions

Provides size specifications for the brick standoff kits.

Standoff Kit Components

Details the parts included in the standard standoff kit.

Brick Standoff Kit Components

Details the parts included in the brick standoff kit.

Terminal Guard Overview

Explains the purpose and overview of the terminal guard.

Terminal Clearances

Minimum Terminal Clearances (Table 1)

Lists minimum air terminal clearance requirements for Canada and the USA.

Silhouette Terminal Clearances (Table 2)

Provides specific clearance data for Silhouette terminals based on wall finish and soffit conditions.

Pre-Installation

Firestop Spacer Installation

Details the procedure for installing the firestop spacer when venting through an exterior wall.

Installation

Vinyl Siding - Less Than 1" (4"/7")

Specific installation steps for vinyl siding less than 1 inch thick for 4"/7" terminals.

Vinyl Siding - Less Than 1" (5"/8")

Specific installation steps for vinyl siding less than 1 inch thick for 5"/8" terminals.

Vinyl Siding - Between 1" and 2" (All)

Installation steps for vinyl siding between 1 and 2 inches thick for all terminal sizes.

Exterior Finish Material - Less Than 1" (All)

Installation steps for exterior finish materials less than 1 inch thick for all terminal sizes.

Exterior Finish Material - Between 1" and 2" (All)

Installation steps for exterior finish materials between 1 and 2 inches thick for all terminal sizes.

Brick Installation (All)

Specific installation instructions for brick exteriors.

Terminal Guard Installation

Instructions for installing the terminal guard for accessible locations.

Replacement Parts

Overview of Replacement Parts

Information on ordering and identifying replacement parts for the appliance.

Exhaust Shield Components

Lists part numbers for the exhaust shields for ST47U and ST58U-1.