Napoleon GPFCE User Manual

EN
DE
P.7
FR
P.13
NL
P.19
FI
P.25
SE
P.31
RU
P.37
www.napoleongrills.com
N415-0396 FEB 08.18
WARNING! Wear safety glasses and gloves when handling
and installing the glass surround. Do not change or substute the
tempered glass provided with this appliance. If replacing, use only
replacement glass available from your local authorized dealer /
distributor.
GPFCE
OPTIONAL GLASS SURROUND WIND SCREEN
INSTALLATION
Wolf Steel Ltd.
214 Bayview Drive,
Barrie, Ontario, CANADA L4N 4Y8
grills@napoleonproducts.com
Wolf Steel Europe BV
Poppenbouwing 29-31,
4191 NZ Geldermalsen,
CCI No. 51509970, THE NETHERLANDS
info@napoleongrills.nl

Napoleon GPFCE Specifications

General

Brand	Napoleon
Model	GPFCE
Category	Fireplace Accessories
Language	English

Summary

Optional Glass Surround Wind Screen Installation

Step 1: Position Corner Brackets

Center and position the corner brackets onto the patio flame enclosure according to the illustration.

Step 2: Secure Glass in Bracket

Loosen set screw, slide glass into bracket, ensuring it rests on the bottom. Clamp marks on glass are normal.

Step 3: Install Connecting Brackets

Loosen set screws in connecting brackets, slide glass pieces into place, and secure them against the bottom.

Step 4: Final Screw Tightening

Tighten all screws carefully. Do not over-tighten to avoid damaging the glass.

Important Safety Warning: Hot Glass

Warning: Hot glass can cause burns. Avoid touching until cooled. Keep children away from hot glass.