Napoleon Dynamic Heat Control User Manual

FRENCH
PG. 27
W415-2753 / A / 07.20.20
ADD MANUAL TITLE
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030
Phone 1 (866) 820-8686 • www.napoleon.com • hearth@napoleon.com
CERTIFIED TO THE CANADIAN AND AMERICAN NATIONAL STANDARDS:
CSA 2.22 AND ANSI Z21.50 FOR VENTED DECORATIVE GAS APPLIANCES
INSTALLER:
Leave this manual with the appliance
CONSUMER:
Retain this manual for future reference
ADD PRODUCT CODE HERE (TRADE GOTHIC LT STD FONT)
NATURAL GAS MODELS:
PROPANE GAS MODELS:
Product Name / Code
(MUST use title from Price Book)
ADD ____ ILLUSTRATED
ADD PRODUCT IMAGE
CSA /
INTERTEK
LOGO
SAFETY INFORMATION
- Do not store or use gasoline or other
fl ammable vapors and liquids in the vicinity of
this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not
use any phone in your building.
• Immediately call your gas supplier from a
neighbour’s phone. Follow the gas
supplier’s instructions.
• If you cannot reach your gas supplier, call
the fi re department.
- Installation and service must be
performed by a qualifi ed installer, service
agency, or the supplier.
This appliance may be installed in an aftermarket,
permanently located, manufactured home (USA
only) or mobile home, where not prohibited by
local codes.
This appliance is only for use with the type of gas
indicated on the rating plate. This appliance is
not convertible for use with other gases, unless
a certifi ed kit is used.
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
WARNING
!
ENGLISH
$10.00
FOR INDOOR USE ONLY
IF INSTALLATION + OPERATION, ADD SERIAL
NUMBER LABEL HERE
IF SEPARATE MANUALS, ADD “PLACE
BARCODE LABEL ON THE OWNER’S MANUAL”
INSTALLATION MANUAL
FOR INDOOR USE ONLY
FOR USE WITH ELEVATION™ X
MODELS ONLY
These installation instructions MUST be used in conjunction with the Elevation™ installation manual.
(Installation Option 2 illustrated)
Dynamic Heat Control™
air outlet opening

Napoleon Dynamic Heat Control Specifications

General

Brand	Napoleon
Model	Dynamic Heat Control
Category	Fireplace Accessories
Language	English

Summary

General Information

Installation Planning and Options

Clearance to Fire Sprinklers

Safety guidelines for maintaining adequate clearance from fire sprinkler systems near the air outlet.

Installation Option 1: Open Enclosure

Details for open enclosure installation stopping short of ceiling; not for Dynamic Heat Control™ Plus.

Installation Option 2: Front Opening

Front opening installation details for Dynamic Heat Control™ Plus, including specific air outlet dimensions.

Installation Option 3: Rear Opening

Rear opening installation for Dynamic Heat Control™ Plus, requiring specific air outlet placement and adjoining room conditions.

Installation Option 4: Open Enclosure with Valance

Open enclosure with hard combustible valance installation; not suitable for Dynamic Heat Control™ Plus.

Installation Option 5: Side Openings

Dual side opening installation for Dynamic Heat Control™ Plus, specifying minimum air outlet dimensions.

Appliance Overview

Dynamic Heat Control™ Installation Procedures

High Limit Switch Installation

Mandatory procedure for installing the high limit switch to ensure safe appliance operation.

Minimum Framing Dimensions

Combustible Enclosure Clearances

Rough Framing Before Installation

Finish Framing After Installation

Finishing and Enclosure Design

Enclosure Design for Airflow

Enclosure design rules to maintain chimney effect and prevent overheating for optimal system performance.

Optional Trim Finishing

Guidance on applying decorative trim to air outlet openings, ensuring minimum opening area is maintained.

Combustible Mantel Clearances

Maximum Finishing Protrusion

Dynamic Heat Control™ Installation Checklist