EasyManua.ls Logo

Napoleon B36PTREA-1 User Manual

Napoleon B36PTREA-1
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FRENCH
PG. 69
W415-3093 / B / 05.06.22
ADD MANUAL TITLE
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030
Phone 1 (866) 820-8686 • www.napoleon.com • hearth@napoleon.com
CERTIFIED TO THE CANADIAN AND AMERICAN NATIONAL STANDARDS:
CSA 2.22 AND ANSI Z21.50 FOR VENTED DECORATIVE GAS APPLIANCES
INSTALLER:
Leave this manual with the appliance
CONSUMER:
Retain this manual for future reference
ADD PRODUCT CODE HERE (TRADE GOTHIC LT STD FONT)
NATURAL GAS MODELS:
PROPANE GAS MODELS:
Product Name / Code
(MUST use title from Price Book)
ADD ____ ILLUSTRATED
ADD PRODUCT IMAGE
CSA /
INTERTEK
LOGO
SAFETY INFORMATION
- Do not store or use gasoline or other
ammable vapors and liquids in the vicinity of
this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not
use any phone in your building.
Immediately call your gas supplier from a
neighbour’s phone. Follow the gas
supplier’s instructions.
If you cannot reach your gas supplier, call
the fi re department.
- Installation and service must be
performed by a qualifi ed installer, service
agency, or the supplier.
This appliance may be installed in an aftermarket,
permanently located, manufactured home (USA
only) or mobile home, where not prohibited by
local codes.
This appliance is only for use with the type of gas
indicated on the rating plate. This appliance is
not convertible for use with other gases, unless
a certifi ed kit is used.
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
WARNING
!
ENGLISH
$10.00
FOR INDOOR USE ONLY
IF INSTALLATION + OPERATION, ADD SERIAL
NUMBER LABEL HERE
IF SEPARATE MANUALS, ADD “PLACE
BARCODE LABEL ON THE OWNER’S MANUAL”
B36NTREA-1
B36PTREA-1
Ascent™ 36-1
INSTALLATION AND
OPERATION MANUAL
B36 ILLUSTRATED
B36 ILLUSTRÉ
SAFETY BARRIER
ÉCRAN DE PROTECTION

Table of Contents

Questions and Answers:

Napoleon B36PTREA-1 Specifications

General IconGeneral
BrandNapoleon
ModelB36PTREA-1
CategoryFireplace Accessories
LanguageEnglish

Summary

Safety Information

Fire or Explosion Hazard

Details risks like storing gasoline near the appliance and potential for fire or explosion.

What to Do If You Smell Gas

Step-by-step instructions for responding to a gas leak, including immediate actions and contact information.

General Safety Precautions

Hot Surfaces and Burn Hazards

Warns about hot glass and surfaces, and the need for safety barriers to prevent burns.

Appliance Alterations and Operation

Prohibits unauthorized modifications and emphasizes adherence to operating instructions.

Product Safety Warnings

Chemical Exposure and Health Risks

Warns about California Prop 65 chemicals like lead and carbon monoxide exposure.

Fire Risk and Delayed Ignition

Discusses risks of high gas pressure damaging valves and potential for delayed ignition.

1.0 General Information

General Information and Safety

Installation and Operation Warnings

Crucial warnings for installation, operation, clearances, and ventilation.

2.0 Venting Requirements

2.1 Typical Vent Installation

Horizontal Venting Rise Requirements

Specifies the required rise per foot for horizontal vent runs.

Rear Vent Installation

2.2 Special Vent Installations

2.3 Minimum Air Terminal Clearances

Installation Clearance Table

Table detailing required clearances for various terminal locations.

2.4 Venting Application Flow Chart

Top Exit Venting Guide

Flow chart for determining valid top exit vent configurations.

Rear Exit Venting Guide

Flow chart for determining valid rear exit vent configurations.

2.7 Top Exit Horizontal Termination

Top Exit Horizontal Termination

2.8 Rear Exit Horizontal Termination

Horizontal Venting Graph

Graph to determine required vertical rise for horizontal vent runs.

Rear Exit Horizontal Termination

2.9 Top and Rear Exit Vertical Termination

Vertical Venting Graph

Graph to determine required vertical rise for vertical vent runs.

Top and Rear Exit Vertical Termination

Venting Configuration Examples

Worked examples for calculating vent lengths in vertical termination configurations.

2.10 Rear Exit

Rear Exit Installation Procedure

Step-by-step instructions for installing the rear exit vent assembly.

2.12 Top Exit

Top Exit Installation Procedure

Step-by-step instructions for installing the top exit vent assembly.

3.0 Rough Framing

3.1 Minimum Framing Dimensions

3.2 Minimum Enclosure Clearances

Minimum Rear Vent Clearances

Maximum Rear Vent Clearances

4.0 Venting Installation

General Venting Installation Warnings

Critical safety warnings regarding vent installation procedures.

4.1 Horizontal Installation

Firestop Assembly Installation

Instructions for installing the firestop assembly for horizontal venting.

4.2 Vertical Installation

Roof Terminal Installation Steps

Detailed steps for installing vent terminals through the roof.

4.3 Using Flexible or Rigid Vent Components

4.3.1 Horizontal Air Terminal Installation

Installing air terminals for horizontal vent runs.

4.3.2 Vertical Air Terminal Installation

4.3.4 Horizontal Air Terminal Installation

4.3.5 Vertical Air Terminal Installation

4.4 Vertical Through Existing Chimney

Chimney Venting System Requirements

Guidelines for using flex vent systems in masonry chimneys.

5.0 Electrical Information

6.0 Gas Installation

Gas Connection Safety and Codes

Critical warnings and code requirements for gas connections.

7.0 Operation

Lighting Instructions

Step-by-step guide for lighting the appliance pilot and burner.

8.1 Minimum Framing Dimensions

9.0 Finishing

9.3 Non-Combustible Facing Material

9.4 Minimum Mantel Clearances

9.5 Recessed Installation

9.6 Log Placement

Log Placement Details

10.0 Optional Blower Installation

11.0 Adjustment

12.0 Maintenance

13.0 Replacement Parts

15.0 Troubleshooting

Main Burner Flame Issues

Diagnosing and resolving issues with the main burner flame pattern.

Carbon Deposits and White Film

Addressing causes and solutions for carbon deposits and white film.

Exhaust Fumes and Spillage

Troubleshooting exhaust fumes and appliance spillage problems.

Troubleshooting Guide

Pilot Ignition and Spark Issues

Diagnosing problems with pilot ignition and spark generation.

Lighting, Blower, and Flame Behavior Issues

Resolving problems with lighting, blower function, and flame behavior.

Remote Control System Malfunctions

Troubleshooting remote control and receiver operational issues.

Appliance Performance Issues

Troubleshooting general appliance performance and function problems.

16.0 Warranty

Related product manuals