Safety & WarningSafety & Warning
The NPFC series LiFePOThe NPFC series LiFePO
battery system installation, operation, maintenance should followbattery system installation, operation, maintenance should follow
important recommendations in this manual:important recommendations in this manual:
The equipment shall be installed by the professional training staffThe equipment shall be installed by the professional training staff
Battery maintenance should be carried out by the experienced professionals and awareBattery maintenance should be carried out by the experienced professionals and aware
of the preventive measures on the potential harm of the battery.of the preventive measures on the potential harm of the battery.
Note: Be care of the rNote: Be care of the r
isk of electric shocisk of electric shoc
k for large currenk for large curren
t in case of battery t in case of battery
short circuit,short circuit,
pay attention to the followpay attention to the follow
ing points during operationing points during operation
Remove watches, rings or other metal objectsRemove watches, rings or other metal objects
Use tools with insulated handlesUse tools with insulated handles
Do not place tools or Do not place tools or
metal objects on the batterymetal objects on the battery
Do not direct access to the battery system to the Do not direct access to the battery system to the
mains grid power outletmains grid power outlet
Do not put the battery system into fire, do not use or storage the battery near to the highDo not put the battery system into fire, do not use or storage the battery near to the high
temperature sourcetemperature source
Do not use liquid Do not use liquid
or other objects placed into the battery system.or other objects placed into the battery system.
Do not open or cut Do not open or cut
the battery, not to hit, throw or the battery, not to hit, throw or
step on the batterystep on the battery
Using special communication between battery module and Using special communication between battery module and
power plant to power plant to
charge batterycharge battery
Be sure to subject to Be sure to subject to
charge and discharge parametcharge and discharge paramet
ers setting in this ers setting in this
The output interface of the system is still voltage when grid power cut, avoid electricThe output interface of the system is still voltage when grid power cut, avoid electric
shock or short circuit when operationshock or short circuit when operation
Please check if the box is damaged. If damaged, please immediately notify the supplierPlease check if the box is damaged. If damaged, please immediately notify the supplier
If you find leaking liquid or white If you find leaking liquid or white
powder residue on product, prohibit operation.powder residue on product, prohibit operation.
To Next Page
Loading...
Need help?
General
