Narada NPFC Series - User Manual

Questions and Answers

M
melissa89Aug 4, 2025
What to do if Narada Camera Accessories battery cannot discharge?
- S
  Sean LiAug 4, 2025
  If your Narada Camera Accessories battery isn't discharging, it could be due to several reasons. It might be protected against under-voltage, in which case you should charge the battery. It could also be due to over-temperature or under-temperature; ensure the cell temperature is between -20°C and 70°C for discharge. A short circuit could be the cause; relieve the short circuit and charge the battery. Alternatively, it might be drawing too much current; remove some unimportant load and charge the battery. If none of these resolve the issue, it could be a system failure, in which case you should shut down the system and call maintenance service.
C
cameron29Aug 11, 2025
What to do if Narada Camera Accessories battery cannot charge?
- A
  agrantAug 11, 2025
  If your Narada Camera Accessories battery is not charging, there could be a few reasons. It might already be fully charged, which is normal. Another reason might be protection against over voltage, which doesn't require any action. If the cell temperature is too low (lower than -10°C) or too high (higher than 70°C), regulate the cell temperature between 0°C and 55°C for charging. If none of these seem to be the issue, there may be a system failure, requiring you to shut down the system and contact maintenance service.
E
Elizabeth ShafferAug 19, 2025
Why all LED indicators on Narada Camera Accessories are on?
- A
  Angela CoxAug 19, 2025
  If all the LED indicators on your Narada Camera Accessories are on, this indicates a system failure. In this case, you should shut down the system and call for maintenance service.
C
Cindy BeckerAug 27, 2025
How to fix communication failure in Narada Camera Accessories?
- R
  Rita LewisAug 27, 2025
  If you are experiencing a communication failure with your Narada Camera Accessories, there are a few things you can check. First, inspect the communication cable for any faults. If the cable is fine, try pressing the RESET button in case there's a halt in system communication management. If the problem persists, it could be a system failure, requiring you to shut down the system and call for maintenance service.

Narada NPFC Series Specifications

General

Brand	Narada
Model	NPFC Series
Category	Control Unit
Language	English

Summary

Product Introduction

Product Overview

Provides a general overview of the NPFC series 48V LiFePO4 battery system for telecom backup.

Working Principle

Explains the operational principles of the NPFC battery system, including its components and schematic.

Battery Management System (BMS)

Details the smart BMS technology, its features like remote monitoring, and protections.

Applications

Lists the various applications for the NPFC series battery systems in telecommunications.

Battery Model Instruction

Explains how to interpret the NPFC series battery model codes and their specifications.

Electric Performance

Presents a table detailing the electric performance characteristics of various NPFC battery models.

Structure and Mechanical Performance

Describes the structural drawing, output terminals, and mechanical specifications of NPFC series batteries.

Technical Characteristics

Discharge Performance

Illustrates the constant current discharge curves for NPFC Series batteries at different rates.

Charge Performance

Shows the charge characteristics with various current limitations for NPFC Series batteries.

Constant Current Discharge Datasheet

Provides detailed datasheets for constant current discharge performance of NPFC Series batteries.

Constant Power Discharge Datasheet

Provides datasheets for constant power discharge performance of NPFC Series batteries.

Operation and Maintenance

Operation Environment Requirements

Specifies the required environmental conditions for operating and storing NPFC series batteries.

Power Plant Parameter Settings

Details the parameter settings for the power plant when using NPFC series lithium batteries.

Front Panel Layout

Illustrates the front panel layout of NPFC Series Batteries and provides instructions for its components.

Unboxing and Inspection

Provides instructions for unboxing and inspecting the NPFC series battery modules before installation.

Installation Preparation

Outlines the necessary preparations before installing the NPFC series battery modules.

Battery Module Installation

Details the steps for installing NPFC series battery modules, including fixation and connections.

Maintenance Procedures

Provides guidelines for the maintenance of NPFC series batteries, including cleaning and storage.

Troubleshooting and Solutions

Instructions for LED Flicker

Instructions for Dialing of ADD

Communication Protocol for RS232 and RS485

Related product manuals

Narada NPFC Series - User Manual

Table of Contents

Questions and Answers

Narada NPFC Series Specifications

Summary

Product Introduction

Product Overview

Working Principle

Battery Management System (BMS)

Applications

Battery Model Instruction

Electric Performance

Structure and Mechanical Performance

Technical Characteristics

Discharge Performance

Charge Performance

Constant Current Discharge Datasheet

Constant Power Discharge Datasheet

Operation and Maintenance

Operation Environment Requirements

Power Plant Parameter Settings

Front Panel Layout

Unboxing and Inspection

Installation Preparation

Battery Module Installation

Maintenance Procedures

Troubleshooting and Solutions

Instructions for LED Flicker

Instructions for Dialing of ADD

Communication Protocol for RS232 and RS485

Related product manuals