26
Operation
and use
If the battery capacity is only sufficient for a
few more hours of operation, the LED display
of operational readiness is replaced by a brief
“beep”.
Resetting the Max Hold function
Switch the ESM “RadMan” off and then on
again.
Maximum
value
(Max Hold)
LED
display
Battery
status
Loud-
speaker
100% 100% Full -
100% 100% Empty Beep
50% 50% Full -
50% 50% Empty Beep
25% 25% Full -
25% 25% Empty Beep
<25% 12.5% Full -
<25% 12.5% Empty Beep
Operational readiness, Max Hold
To Next Page
