Need help?Do you have a question about the NARDA NBM-550 and is the answer not in the manual?
General| Brand | NARDA |
|---|---|
| Model | NBM-550 |
| Category | Measuring Instruments |
| Language | English |
Manual for operating the Narda Broadband Field Meter NBM-550.
Basic information on measuring electromagnetic fields.
Overview of the Narda Broadband Field Meter NBM-550 instrument.
Details about the optional EHP-50 Analyzer accessory.
Information about the structure and conventions of the operating manual.
Guidance on how to effectively use the operating manual.
Defines the intended and correct usage of the NBM-550 instrument.
Describes incorrect usage and potential risks associated with it.
Highlights potential hazards related to electromagnetic fields.
Safety precautions for handling rechargeable batteries.
Safety precautions related to the AC adapter and charger.
Instructions for unpacking the instrument and its accessories.
Detailed overview of the NBM-550 instrument's components and controls.
Information on powering the NBM-550 using batteries or AC adapter.
Details on powering the optional EHP-50 Analyzer.
Guidance on connecting various types of probes to the NBM-550.
Instructions for connecting and setting up the EHP-50 Analyzer.
Steps for installing the optional GPS receiver module.
Instructions on how to attach and use the table top tripod.
Procedure for powering on the NBM-550 and its self-test.
Explanation of the instrument's operating concept and menu structure.
Guide to configuring essential instrument settings like language and contrast.
Tips and factors to consider for accurate measurements.
How to perform measurements using the Normal display mode.
Techniques for determining spatial average field strength.
How to use the History display mode to view measurement progress.
How to use the XYZ display mode for axis-specific measurements.
How to use the Monitor display mode for real-time value tracking.
How to set and activate alarm limits for measurements.
Using the audible indicator to locate field maxima.
Performing measurements using predefined test standards.
Applying a correction frequency to enhance measurement accuracy.
Overview of the EHP-50 Analyzer's standalone operation and PC control.
Description of available display types for LF measurements.
Common settings applicable across different display modes.
Using the Weighted Peak method for complex signal analysis.
Displaying field strength versus frequency graphically and numerically.
Normalized measurements against safety standards as percentage values.
Displaying results for each spatial axis and isotropic value.
Displaying actual, max, average, and minimum values simultaneously.
Additional settings and unavailable functions in LF mode.
Methods for storing individual or sequential measurement data.
Setting parameters and starting timer-controlled measurement recording.
Setting conditions to trigger and record measurements.
Displaying, managing, and deleting recorded measurement data.
Setting up the USB or optical interface for PC connection.
Saving and recalling instrument setups for different configurations.
Accessing information about the instrument and connected probe.
Using the NBM-550 to control other Narda instruments.
Activating optional features using an activation code.
Overview of NBM-TS PC software functions and system requirements.
Steps to connect the NBM-550 to a PC via USB or optical cable.
Prerequisites and basic steps for using the PC software.
Procedure for updating the NBM-550 firmware using the PC software.
How to reset the instrument to its initial state.
Explanation of the function keys in measurement menus.
Structure and access to the main menu and its sub-menus.
Configuration options for HF measurement settings.
Configuration options for LF measurement settings.
Setting parameters for recording measurement data.
Displaying and deleting stored measurement data.
Configuring interface settings like GPS display and audio output.
Accessing instrument and probe information.
Saving and recalling instrument setups and power-on behavior.
Setting the instrument's time and date.
Instructions on how to clean the instrument safely.
Step-by-step guide for battery replacement and safety.
Guidelines for proper disposal of the instrument and batteries.
Procedures for testing instrument and probe functionality.
Technical specifications related to the instrument's display.
Detailed specifications of measurement functions for HF probes.
Specifications for the instrument's result memory capacity.
Specifications for the instrument's communication interfaces.
Specifications for optional features like Conditional Logging and GPS.
General technical specifications of the NBM-550 instrument.
Compliance of the instrument with relevant standards and directives.
Technical specifications for the AC adapter and charger.
Reference to EHP-50 specifications in its separate manual.
CE declaration of conformity for the NBM-550.
Information regarding the country of origin for the products.
Ordering information for the NBM-550 basic unit and sets.
List of available high frequency probes for the NBM-550.
Information on ordering various accessories for the NBM-550 and EHP-50.
To Next Page
