4.3 Making basic settings
Narda NBM-550 35
To simplify the description of the selection of a menu level or
function, the menu and function names will be listed one
after the other and separated by a slash.
Example: To change the start time, open the Timer Start function
(MAIN/DATA LOGGER/...).
You can find an overview of all the menus and functions
under “Overview of all menus and functions” on
page 101.
4.3 Making basic settings
When the self test is complete, the display switches to
measurement mode.
The settings will depend on the power on behavior that you
have selected (see “Saving and loading instrument
settings” on page 90).
Selecting the language
You can set the user interface language to a different
language.
Changing the user interface language
1. Open the Language function (MAIN/MEASUREMENT
SETTINGS/...).
2. Use the arrow keys ▲/▼ to select the desired language
and then press the OK key to confirm the setting.
Setting the auto zero adjustment
Zeroing compensates for the influence of temperature
fluctuations on the measurement results of the basic unit.
No measurement is possible during a zeroing, which takes
7s. For this period, the last measurement value is displayed
and a remaining time counter is shown.
If the Auto-Zero Interval function is activated, an automatic
zero adjustment will be performed at the specified intervals.
To Next Page
Loading...
