5 Measuring with the NBM-550 and HF probes
54 NBM-550 Narda
Storing the graphical record
The measurement values of the progress memory can be
saved.
To save the measurement value recording:
1. Press the Hold key to freeze the curve.
2. Press the Store History function key.
The measurement value recording is saved. You can
add a comment if this function is activated.
5.5 Measuring in XYZ display mode
In XYZ display mode, the measurement values of the three
spatial axes as well as the isotropic field strength calculated
from them are displayed simultaneously.
Note: XYZ display mode is not available for all probe types. If the
probe you are using does not support XYZ mode, it will not
be available for selection.
Changing to XYZ display mode
✓ The display is in measurement mode.
1. Press the OK key to open the MAIN menu.
2. Press the Display function key until Display: XYZ
appears.
3. Press the ESC key to return to measurement mode.
To Next Page
Loading...
