1 Useful information
4 NBM-550 Narda
with the NBM-550 as a convenient control and display unit.
Even so, the EHP-50 still performs the measurement by
itself and transfers the results to the NBM-550 in digital form
via an optical cable.
Note: The NBM-550 only supports the functions of the EHP-50 for
versions EHP-50D and EHP-50F. The EHP-50D has a
frequency range restricted to 5 Hz – 100 kHz and does not
yet support the Weighted Peak method.
1.4 About this operating manual
Structure of this operating manual
This operating manual is divided into two main parts:
1. Operating the NBM-550 and measuring with HF probes:
You will find all the information you need to make the
most important settings on the NBM-550 and easily
carry out most of the measurement tasks using HF
probes in chapters 3 to 5 and 7 to 9.
2. Measuring with the EHP-50 Analyzer:
You will find all the information you need to operate the
EHP-50 LF Analyzer in conjunction with the NBM-550 in
chapter 6. Cross references are provided to information
already described in other chapters.
3. Overview of menus and their functions:
You will find an overview of all menu functions, together
with a brief description of each function in chapter 10.
You can use this overview to find a function quickly.
User interface language
English language terms are used in this operating manual to
describe the user interface.
You can display the user interface of the NBM-550 in other
languages (see “Selecting the language” on page 35).
Please note that if you change the language, the
displayed terms will differ from those described in this
manual.
To Next Page
Loading...
