NARDA EHP-50F User Manual

NARDA
Safety
Test
Solutions
S.r.l. Socio Unico
Sales & Support:
Via Leonardo da Vinci, 21/23
20090 Segrate (MI) - ITALY
Tel.: +39 02 2699871
Fax: +39 02 26998700
Manufacturing Plant:
Via Benessea, 29/B
17035
Cisano sul Neva (SV)
Tel.: +39 0182 58641
Fax: +39 0182 586400
http://www.narda-sts.it
SERIAL NUMBER OF THE INSTRUMENT
You can find the Serial Number on the bottom cover of the instrument.
The Serial Number is in the form: 000XY00000.
The first three digits and the two letters are the Serial Numb
er prefix, the last five
digits are the Serial Number suffix. The prefix is the same for identical instruments,
it changes only when a configuration change is made to the instrument.
The suffix is different for each instrument
Document EHP50FEN-50501-1.63 – Copyright © NARDA 2015
User’s Manual
EHP-50F
ELECTRIC AND MAGNETIC
FIELD PROBE - ANALYZER
From 1 Hz up to 400 kHz

NARDA EHP-50F Specifications

General

Brand	NARDA
Model	EHP-50F
Category	Measuring Instruments
Language	English

Summary

Safety Recommendations and Instructions

General Information

EHP-50F Main Technical Specifications

Lists key technical specifications of the EHP-50F analyzer.

EHP-50F Uncertainty and Anisotropy Analysis

Details the typical uncertainty and anisotropy of the EHP-50F.

EHP-50F Typical Measurement Uncertainty

Presents typical measurement uncertainty figures for the EHP-50F.

Installation and Use

EHP-50F Power Supply and Battery Recharging

Details how to connect power and recharge the internal battery.

EHP-50F Stand Alone Operation Mode

Describes using the EHP-50F without external connections for data acquisition.

Using EHP-50F with NBM-550

Avoiding Measurement Errors with EHP-50F

Provides tips to ensure accurate measurements and avoid interference.

EHP-TS Installation

Step-by-Step EHP-TS Software Installation

Guides the user through the EHP-TS software installation process.

EHP-TS Software

EHP50-TS Application Description

EHP50-TS Main Menu Interface

Describes the main window and its components in the EHP50-TS software.

EHP-TS Weighted Peak Function (Time Domain)

Describes the Weighted Peak option for analyzing time-domain signals.

Requirements for Weighted Peak Function

EHP-TS Weighted Peak Mode Operation

Explains how the Weighted Peak mode displays results and graphs over time.

EHP-50F Stand Alone Mode

EHP-50F Stand Alone Mode Operation

Describes how to use the EHP-50F for measurements without PC connection.

EHP-50F Data Logger Functionality

Explains how to log and download data from the EHP-50F.

Running EHP-50F Stand Alone Software

Using the EHP-50F Data Logger

Update Firmware

EHP-50F Firmware Update Process

Provides information and steps for updating the EHP-50F internal firmware.

Running the EHP-50F Firmware Update Software

Guides on how to launch the firmware update program.

Transferring Data During Firmware Update

Explains the data transfer steps involved in the firmware update.

Uninstalling Software

Uninstalling the EHP-TS Software

Provides the procedure for removing the EHP-TS software from the PC.

Uninstalling USB-OC

Uninstalling the USB-OC Driver

Guides on how to remove the USB-OC driver from the PC.

Accessories

NBM-550 Controller and Display Unit for EHP-50F

Describes using the NBM-550 as a controller and display unit for the EHP-50F.

USB-OC Optical USB Converter