EHP-TS software 3-1
3 – EHP-TS installation
3.1 Introduction
EHP-TS is a useful software tool developed for remote PC control, through
fibre optic link, of EHP family Electromagnetic field analyzers.
By means of the recently introduced USB-OC optical to USB converter,
EHP-50F and EHP-200A can be connected to a PC USB port.
Using the former optical/RS232 adapter, the selected COM port should be
assigned to the application software (see cap.5 EHP-TS applications).
EHP-TS software requires that at least one of the mentioned analyzers is
connected to PC in order to run.
The EHP-TS installation program automatically installs the driver for USB
optical converter.
3.2 Hardware
requirements
Minimum requirements:
x Processor: Pentium or equivalent
x 256 MB RAM
x At least 64 MB of free space on hard disk
x 1 free USB or RS232 port
x Windows Operating system XP/Vista/Win7/Win8
The User might have the need of administrator privileges to install
and run the software in Windows 7, Windows 8; for further
information see the next paragraph.
EHP-TS software does not work with EHP50A/B.
The EHP-50F requires an EHP50-TS software version 1.61, included in
the EHP-TS software setup version 1.64 or later.
The new releases can be downloaded directly from the narda website.
http://www.narda-sts.it
1
Document EHP50FEN-50501-1.63 - © NARDA 2015
To Next Page
Loading...
