Accessories 9-3
9.2
NBM-550 Controller and Display Unit for EHP-50F
Fig. 9-1 NBM-550
EHP-50F can be easily operated using the Broadband Field Meter NBM-
550 as a controller and display unit. In order not to influence the field to be
measured, communication between the EHP-50F Analyzer and the NBM
Unit is through a rugged optical fibre cable. The NBM-550 supports the
following settings and measurement modes:
x Electric or magnetic field selection (1 kV/m; 100 kV/m; 100 μT; 10 mT)
x Span selection (100 Hz 400 kHz)
x Wideband or highest peak modes
x Spectrum Mode
x Monitor Mode (Actual; Max; Avg; Min)
x XYZ Mode (wideband or highest peak)
x Weighted Peak (WPM) ranging from 1 Hz to 400 kHz
Additional features include:
x Measurement setups
x Normalized spectrum in % related to a standard (e.g. ICNIRP)
x Alarm with adjustable thresholds for electric and magnetic field
x Averaging (4-32 samples) and Maximum Hold
x Unit selector for Tesla/Gauss
x Full resolution spectrum marker
x Data storage on NBM-550 including spectrum data
x Timer Logging
x Post-averaging for logged data on PC (RMS, Mean, Median)
x Powerful PC software NBM-TS for evaluation and documentation
x GPS receiver (optional)
x Operating languages:
Chinese, English, French, German, Italian, Russian, Spanish, Turkish
For more information, please refer to the NBM-550 product information on
the Narda website.
Fig. 9-2 NBM-TS software supports evaluation and documentation of
results that have been saved on NBM-550
To Next Page
Loading...
