Installation and use 2-3
2.7 EHP-50F connected
to a PC
Using the EHP-TS software spectrum analysis can be displayed on a PC
2.8 EHP-50F stand alone
Mode
The EHP-50F offers a Stand-alone mode of operation and thanks to its
internal memory is possible to perform a long term acquisition without
connecting it to any external device.
With EHP-50F is possible to collect data every 1 minute or every 30
seconds for 24 hours. Later on, it is possible to download all collected data
to any PC by using the provided EHP-TS PC software.
2.9 EHP-50F with
NBM-550
EHP-50F is linked to NBM-550 via the fiber optic link.
See NBM-550 Manual for further details
2.10 Battery
management
The Table summaries the battery autonomy of the Analyzer depending on
its mode of operation.
TABLE 2-1 Autonomy of the battery
STAND ALONE MODE
Span
Normal functioning
Autonomy (hours)
30s Sample 60s Sample
100 Hz >10 --- ---
200 Hz >10 --- ---
500 Hz >9 >24 >24
1 kHz >9 >24 >24
2 kHz >8 >24 >24
10 kHz >8 >24 >24
100 kHz >8 >24 >24
400 kHz >8 >24 >24
To Next Page
Loading...
