NARDA NBM-550 - 5 Measuring with the NBM-550 and HF Probes

Narda NBM-550 43
5 Measuring with the
NBM-550 and HF probes
This chapter describes how to use the NBM-550 in
combination with HF probes for measurements.
You can find information on how to use the EHP-50 LF
Analyzer in the chapter “Measurements with the
NBM-550 and EHP-50” on page 63.
You can find an overview of all the menus and functions
under “Overview of all menus and functions” on
page 101.
5.1 Avoiding measurement errors (page 44)
5.2 Measuring in Normal display mode (page 46)
5.3 Measuring the spatial average (page 49)
5.4 Measuring in History display mode (page 52)
5.5 Measuring in XYZ display mode (page 54)
5.6 Measuring in Monitor display mode (page 56)
5.7 Activating the alarm function (page 57)
5.8 Audible Indicator (hot spot search) (page 58)
5.9 Measuring with a test standard (page 58)
5.10 Measuring with a correction frequency (page 62)