NARDA NBM-550 - 6 Measurements with the NBM-550 and EHP-50

Narda NBM-550 63
6 Measurements with the
NBM-550 and EHP-50
This chapter describes the special functions of the
NBM-550 when used with the EHP-50 LF Analyzer.
You can find information about measuring with HF probes in
the chapter “Measuring with the NBM-550 and HF
probes” on page 43.
The EHP-50 Analyzer can also be operated as a stand-
alone FFT analyzer. You can find information on how to
operate it along with further important information in the
Operating Manual for the EHP-50, which is provided as a
PDF file on the EHP-TS PC software CD.
6.1 General information (page 64)
6.2 Display types (page 65)
6.3 General settings (page 66)
6.4 WPM display mode (Weighted Peak method) (page 69)
6.5 Spectrum display mode (page 71)
6.6 Standard display mode (page 73)
6.7 XYZ display mode (page 74)
6.8 Monitor display mode (page 74)
6.9 Other settings (page 75)