NARDINI MASCOTE MS-175E - Nardini Lathe Controls and Operation; Lathe Controls Overview

(,_u)
il;
()\
(0)
'al
\-
<'
(ir)
e)
LATHE
CONTROLS
1.
Circuit control ON and emergency stop. 15. Spindle
speeds selectors.
2.
General
switch.
16.
Spindle
rotation
forward,
reverse and
3. Cross slide
handle.
stop.
4.
Toolpost handle.
5. Top slide handle.
For models
MS-1400E, MS-175E
6.
Tailstock barrel lever. MS-1600E and MS-205AE
7.
Tailstock
clamp lever. 17.
Coolant
pump
ON/OFF button.
8. Tailstock handwheel.
18. Low and hiEh main motor rotation.
9. Lever
for engaging
the leadscrew
nut, the
longitudinal
and tranwersal feeds.
For
rigrth hand apron
models
10,
Engage and desengage of automatic feeds
19.
Apron handwheel.
lever. 20. Engage and desengage of automatic
feeds
11.
Apron handwheel. levers.
12.
Coolant
pump
ON/OFF
button. 21. Lever
for engaging
the leadscrew nut, the
13. Threads
and feeds selectors. longitudinal and tranwersal feeds.
14. Saddle longitudinal motion handle.
12
\',?),
{
i;
I
6)
,r2\
,'D
id,