NASHONE MTS300 - Deactivate Programs

You can deacvate preset programs without
deleng the sengs.
Deacvate individual programs:
1. In clock mode, push and hold SET/OK and push
RND/+ or CD/- repeatly, switch to desired
individual program.
2. Push SET/OK and ON/OFF buon at the same me.
There will be X symbol appears on the display,
individual program is now deacvated.
3. Repeat these steps to reacvate individual program.
Deacvate all the programs:
1. In clock mode, push SET/OK and ON/OFF buon
at the same me.
2. There will be X symbol appears on the display,
all the program is now deacvated.
3. Repeat these steps to reacvate all the program.
No. Descripon Switch-on me Switch-off me
1
Short intervals within a
programable me frame
20 – 40 minutes 40 – 80 minutes
2
40 – 80 minutes 80 – 160 minutes
3
20 – 40 minutes 40 – 80 minutes
Short intervals in infinite loop
Long intervals in infinite loop
Symbol
RND
L-RND
PROG
RND
Deacvate programs
• To start Short random, push the RND/+ buon
• To start Long Random,push RND/+ buon again
• To start Program random, push the RND/+ again
• Push the RND/+ again, cancel random funcon.
16