NASHONE MTS300 - Program countdown (CD)

The mer has a countdown funcon that allows a
connected electrical device to be turned on or off
automacally aer a set me has run down. The
maximum countdown me is 23 hours, 59 minutes
and 59 seconds.
1. In clock mode, push and hold the SET/OK buon
and push the CD/- buon. The display shows the
symbols CD and PROG. The me sets to 0:00:00
and the mer is in countdown mode.
2. Push the SET/OK buon for approx. 3 seconds
unl the display shows SET, CD and PROG.
In addion, ON or OFF blinks.
3. Push the RND/+ or CD/- buon to select ON/OFF:
ON: The mer turns on when the countdown starts
and turns off when the countdown runs down.
OFF: The mer turns off when the countdown starts
and turns on when the countdown runs down.
4. Push the SET/OK buon.The hour blinks.
5. Set the hour using RND/+ or CD/- . Push and hold
either buon to toggle through more quickly.
6. Push the SET/OK buon.The minute blinks.
Program countdown (CD)
13