NASHONE MTS300 - Program Random

Use the random funcon to turn electrical devices
on and off at different random mes, for example
for security reasons,you are not in home in weekend,
You can use this random funcon to control your
home lighng,prevent thief to go into your house.
Program Random
You can set program me frame in PROG 21 ON/OFF
1. In clock mode,push and hold the SET/OK buon
and push the CD/- buon, to switch to program 21.
The display shows the symbols RANDOM and PROG.
There are three different randome mode:
Short random, RND symbol blinks
Long random, L-RND symbol blinks
Program random,PROG and RND symbol blinks
2. Using the same way to set program 21 ON/OFF me
frame( see Program switch ON and OFF mes)
For example, we set PROG 21 as below
PROG 21 ON,18:00:00;PROG 21 OFF,24:00:00,
SA-SU(Saturday to Sunday)
• When the random funcon is acvated, all other
preset programs are deacvated.
15