Chapter 1 Introduction
© National Instruments Corporation 1-5 SCXI-1120/D User Manual
Figure 1-1. The Relationship between the Programming Environment,
NI-DAQ, and Your Hardware
Optional Equipment
National Instruments offers a variety of products to use with your
SCXI-1120/D, as follows:
• Cables and cable assemblies, shielded and ribbon
• Shielded terminal blocks and connector-and-shell assemblies
• SCXI process current resistor kit
• SCXI modules and accessories for isolating, amplifying, exciting, and
multiplexing signals for relays and analog output. With SCXI you can
condition and acquire up to 3,072 channels.
For additional information about optional equipment available from
National Instruments refer to your National Instruments catalogue or
call the office nearest you.
LabWindows/CVI
(Windows 95, 3.1, NT,
or Sun)
LabVIEW
(Windows 95, 3.1, NT
Macintosh, or Sun)
ComponentWorks
(Windows 95, NT)
Conventional
Programming Enviroment
(Macintosh, or Sun)
Virtual Bench
(Windows 95, 3.1)
NI-DAQ
Driver Software
DAQ or
SCXI Hardware
Personal
Computer or
Workstation
To Next Page
Loading...
