National Instruments NI PXIe-4082 - User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

National Instruments NI PXIe-4082 Specifications

General

Form Factor	PXI Express
Architecture	Modular
Category	Digital Multimeter
Channels	1
Sampling Rate	1.8 MS/s
Resolution	6.5 digits
Interface	PXI Express
Operating Temperature Range	0 °C to 55 °C
Storage Temperature Range	-20 °C to 70 °C
Input Channels	1
Frequency Range	DC to 300 kHz

Summary

NI PXIe-4080;4081;4082 Getting Started Guide

Electromagnetic Compatibility Guidelines

Verifying System Requirements

Check system compatibility for the NI 4080/4081/4082 device before installation and use.

Unpacking the Device Kit

Follow safety precautions for handling and unpacking the device to prevent damage.

Preparing the Operating Environment

Device Safety Precautions

Adhere to safety guidelines and warnings when connecting signals to the device.

Understanding Kit Contents

Required Other Equipment

Identify essential external hardware required for operating the NI 4080/4081/4082.

Installing the Software

Steps for installing the necessary NI software, including ADEs and drivers.

Installing the NI PXIe-4080;4081;4082 Module

NI 4080;4081;4082 Front Panel Connectors

Connecting Signals to the DMM

Requirements for Cables and Probes

Configuring NI Hardware in MAX

Programming the NI 4080;4081;4082

Methods for acquiring data using the NI-DMM Soft Front Panel or drivers.

NI-DMM Software Examples

Troubleshooting Common Issues

Device Not Appearing in MAX

Steps to resolve issues where the device is not detected in Measurement & Automation Explorer (MAX).

Module Self-Test Failure

Procedure to follow if the NI 4080/4081/4082 module fails its self-test.

Navigating Resources

Worldwide Support and Services