Name: National Instruments BNC-2115
Brand: National Instruments
Rating: 4 (1 reviews)

To Next Page

To Previous Page

BNC-2115 Installation Guide 10 ni.com

Specifications

This section lists the specifications of the BNC-2115. These specifications

are typical at 25 °C unless otherwise specified.

Field connection .....................................24 BNC connectors

Screw terminal........................................2-pin

Physical

Dimensions .............................................19.05 by 10.48 by 3.51 cm

(7.5 by 4.125 by 1.38 in.)

I/O connector ..........................................68-pin male connector

BNC connectors......................................24

Screw terminal plugs ..............................2

Environment

Operating temperature ............................0 to 70 °C

Storage temperature ................................–55 to 125 °C

Relative humidity ...................................5 to 90% noncondensing

Safety

The BNC-2110 meets the requirements of the following standards for

safety and electrical equipment for measurement, control, and

laboratory use:

• IEC 61010-1, EN 61010-1

• UL 3111-1, UL 61010B-1

• CAN/CSA C22.2 No. 1010.1

Note For UL and other safety certifications, refer to the product label or to ni.com.

Questions and Answers:

Need help?

Do you have a question about the National Instruments BNC-2115 and is the answer not in the manual?

National Instruments BNC-2115 Specifications

General