National Instruments BNC-2110 User Manual

INSTALLATION GUIDE
BNC-2110
Desktop and DIN Rail-Mountable BNC Adapter
for Multifunction DAQ Devices
This installation guide describes how to install and configure your
BNC-2110 accessory with an E Series, S Series, or NI 671X/673X
waveform generation Multifunction DAQ device.
The BNC-2110 is a desktop and DIN rail-mountable BNC adapter you
can connect to data acquisition (DAQ) devices. The BNC-2110 includes
15 BNC connectors, a terminal block with 30 pins for signal connections,
and a 68-pin I/O connector that connects to the E Series, S Series, and
waveform generation Multifunction DAQ devices. The BNC-2110 is ideal
for simplifying connections between your measurement apparatus and your
DAQ device in laboratory, test, and production environments.
What You Need to Get Started
To set up and use your BNC-2110 accessory, you need the following:
❑ BNC-2110 BNC Adapter
❑ BNC-2110 Installation Guide
❑ Multifunction DAQ device and the appropriate cable
❑ Small flathead screwdriver (supplied)
For detailed specifications for the BNC-2110, refer to the Specifications
section.

National Instruments BNC-2110 Specifications

General

Connector Type	BNC
Input Voltage Range	±10 V
Data Acquisition Compatibility	NI DAQ devices
Shielded	Yes
Storage Temperature Range	-20 °C to 70 °C
Output Voltage Range	±10 V
Operating Temperature Range	0 °C to 50 °C
Weight	0.45 kg
Compatibility	NI DAQ devices
Number of Channels	8
Compatible Devices	NI-DAQ

Summary

Installation Guide Overview

What You Need to Get Started

Lists the essential items required to set up and use the BNC-2110 accessory.

Installing Your BNC-2110

Connecting the Cables

Details how to connect the BNC-2110 to compatible DAQ devices using specific cables.

Configuring the BNC-2110

Connecting Analog Inputs

Explains how to use BNC connectors for analog input channels on compatible DAQ devices.

Measuring Floating Signals

Describes switch settings for measuring floating signal sources using the BNC-2110.

Connecting Analog Outputs

Details the use of BNC connectors for analog output channels on the BNC-2110.

Connecting Digital/Timing I/O

Explains connecting digital/timing signals via spring terminals and user-defined BNC connectors.

Specifications

Physical Specifications

Outlines the physical dimensions and I/O connector details of the BNC-2110.

Environmental Specifications

Covers the operating and storage temperature ranges for the BNC-2110.

Safety and Compliance

Electromagnetic Compatibility

Details emissions, immunity, and compliance standards for EMC.

CE Compliance

Lists the product's compliance with European Directives for safety and EMC.