Name: National Instruments BNC-2110
Brand: National Instruments
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Relative humidity................................... 5 to 90% noncondensing

Safety

The BNC-2110 meets the requirements of the following standards for

safety and electrical equipment for measurement, control, and laboratory

use:

• IEC 61010-1, EN 61010-1

• UL 3111-1, UL 61010B-1

• CAN/CSA C22.2 No. 1010.1

Note For UL and other safety certifications, refer to the product label or to ni.com.

Electromagnetic Compatibility

Emissions ............................................... EN 55011 Class A at 10 m

FCC Part 15A above 1 GHz

Immunity................................................ EN 61326:1997 + A2:2001,

Table 1

EMC/EMI............................................... CE, C-Tick, and FCC Part 15

(Class A) Compliant

Note For EMC compliance, you must operate this device with shielded cabling.

CE Compliance

This product meets the essential requirements of applicable European

Directives, as amended for CE marking, as follows:

Low-Voltage Directive (safety) ............. 73/23/EEC

Electromagnetic Compatibility

Directive (EMC) .................................... 89/336/EEC

Note Refer to the Declaration of Conformity (DoC) for this product for any additional

regulatory compliance information. To obtain the DoC for this product, click Declarations

of Conformity Information at

ni.com/hardref.nsf/. This Web site lists the DoCs by

product family. Select the appropriate product family, followed by your product, and a link

to the DoC appears in Adobe Acrobat format. Click the Acrobat icon to download or read

the DoC.

Questions and Answers:

Need help?

Do you have a question about the National Instruments BNC-2110 and is the answer not in the manual?

National Instruments BNC-2110 Specifications

General