Figure 20. 4-slot cRIO-904x Surface Mounting Dimensions
2×
23.7 mm (0.94 in.)
2×
20.3 mm (0.80 in.)
2×
20.3 mm (0.80 in.)
6× ISO M4 × 0.7 Thread
8 mm Maximum Insertion Depth
116.5 mm (4.59 in.)
29.0 mm (1.14 in.)
Figure 21. 8-slot cRIO-904x Surface Mounting Dimensions
3×
23.7 mm (0.94 in.)
3×
20.3 mm (0.80 in.)
3×
20.3 mm (0.80 in.)
120 mm (4.72 in.)
9× ISO M4 × 0.7 Thread
8 mm Maximum Insertion Depth
120 mm (4.72 in.)
14.8 mm (0.59 in.)
Mounting on a Panel
You can use the NI panel mounting kit to mount the cRIO-904x on a panel.
What to use
• cRIO-904x
• Screwdriver, Phillips #2
• NI panel mounting kit
– 4-slot models - 157253-01
• Panel mounting plate
• M4 x 10 screws (x4)
– 8-slot models - 157267-01
• Panel mounting plate
• M4 x 10 screws (x6)
32 | ni.com | cRIO-904x User Manual
To Next Page
Loading...
Need help?
General
