Table 3. STATUS LED Indicators (Continued)
LED Pattern Indication
Continuously blinks The cRIO-9068 has not booted into NI Linux Real-Time. The
cRIO-9068 either booted into an unsupported operating system, was
interrupted during the boot process, or detected an unrecoverable
software error.
On momentarily The cRIO-9068 is booting. No action required.
Off The cRIO-9068 is in run mode. Software is installed and the operating
system is running.
Where to Go Next
NI CompactRIO
Developer’s Guide
ni.com/compactriodevguide
CompactRIO Sample
Projects
LabVIEW » Create Project
NI cRIO-9068 Specifications
ni.com/manuals
NI cRIO-9068 User Manual
ni.com/manuals
C Series Getting
Started Guides
ni.com/manuals
HARDWARE SOFTWARE APPLICATION
SUPPORT
Services
ni.com/services
Community
ni.com/community
Software Support
ni.com/info » swsupport
Configuring a Project
NI-RIO Help
Learn LabVIEW Basics
ni.com/gettingstarted
CompactRIO Examples
NI Example Finder
Support
ni.com/support
Worldwide Support and Services
The NI website is your complete resource for technical support. At ni.com/support, you have
access to everything from troubleshooting and application development self-help resources to
email and phone assistance from NI Application Engineers.
Visit ni.com/services for NI Factory Installation Services, repairs, extended warranty, and
other services.
12 | ni.com | cRIO-9068 Getting Started Guide
To Next Page
Loading...
