Need help?Do you have a question about the National Instruments PXI Series and is the answer not in the manual?
General| Form Factor | PXI |
|---|---|
| Slot Count | 4, 8, 18 slots |
| Cooling | Forced air |
| Compatibility | PXI modules |
| Operating Temperature | 0 °C to 55 °C |
| Relative Humidity | 10% to 90%, non-condensing |
| Dimensions | Varies depending on the specific chassis model |
| Weight | Varies depending on the specific chassis model |
Explains the advantages of the PXI standard for test, measurement, and control systems.
Describes the NI PXI-8109 controller, its features, and block diagram.
Provides step-by-step instructions for installing the controller into a PXI chassis.
Details the procedure for safely removing the controller from the chassis.
Explains how to access and navigate the BIOS setup program and its menus.
Details boot options and settings for LabVIEW RT on the controller.
Provides steps to clear the CMOS contents and reset BIOS settings.
Details methods for restoring the original factory condition of the hard drive.
Lists I/O interfaces, external connectors, bus interfaces, and functions.
Details bootable devices and how to configure the boot order.
Provides guidance on diagnosing and resolving issues when the controller does not boot.
Offers procedures to reset CMOS settings to factory defaults.
Details key features, electrical, and physical specifications of the NI PXI-8109.
Guide to finding answers, drivers, and help via NI's online resources.
To Next Page
