Need help?Do you have a question about the National Instruments PXI-6683 Series and is the answer not in the manual?
Details the warranty terms for hardware and software products.
Lists required items for setting up the module.
Crucial safety precautions for using the product.
Steps for installing the NI-Sync driver software.
General instructions for installing the module into a chassis.
Details connectors and LEDs on the module's front panel.
Explains how the module generates clock signals and events.
Explains how GPS is used for timing and synchronization.
Details the IRIG-B standard for precise timing information.
Describes synchronization over Ethernet using IEEE 1588.
How a Pulse Per Second signal is used for synchronization.
General| Form Factor | PXI |
|---|---|
| Product Type | Timing and Synchronization Module |
| Operating Temperature Range | 0 °C to 55 °C |
| Bus Interface | PXI |
| GPS Receiver | Optional |
| Power Requirements | +3.3 V, +5 V |
| Connectors | BNC, SMB |
| Supported Clock Sources | IRIG-B, GPS |
| Relative Humidity Range | 10% to 90%, noncondensing |
| Chassis Compatibility | PXI |
To Next Page