Chapter 3 I/O Information
NI PXI-8109 User Manual 3-6 ni.com
Ethernet
Figure 3-4 shows the location and pinouts for the Ethernet connector on the
NI PXI-8109. Table 3-4 lists and describes the Ethernet connector signals.
Figure 3-4. Ethernet Connector Location and Pinout
Note
The Ethernet controller can perform automatic crossover, thus eliminating the need
for crossover cables.
Table 3-4. Ethernet Connector Signals
Pin Fast Ethernet Gigabit Ethernet
1 TX+ TX_A+
2 TX– TX_A–
3 RX+ RX_B+
4 NC TX_C+
5 NC TX_C–
6 RX– RX_B–
7 NC RX_D+
8 NC RX_D–
NI PXI-8109
Embedded Controller
Ethernet
1
8
8
1
To Next Page
Loading...
