Chapter 3 Feature Set Description
©
National Instruments Corporation 3-9 FieldPoint FP-1000/1001 User Manual
3 The FP-1000/1001 has detected an irrecoverable
internal error with its firmware.
5 The network module was unable to locate an I/O module
waiting to be configured. Verify that there are no more
than nine terminal bases in the bank, and that no terminal
bases were added to the bank while power was applied.
Table 3-2. STATUS LED Flashes and Corresponding Error Conditions (Continued)
Number of
Flashes
Error Condition
To Next Page
Loading...