EasyManua.ls Logo

National Instruments NI 5402

National Instruments NI 5402
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FunctionAccessConnector
Accepts a trigger from an external
source that can start or step through
waveform generation, or can route
signals out from several clock, event,
and trigger sources.
Input/OutputPFI 0
Accepts a trigger from an external
source that can start or step through
waveform generation or can route
signals from several clock, event,
and trigger sources.
Input/OutputPFI 1
Routes the 16-bit digital pattern
outputs, digital pattern clock output,
trigger outputs, trigger inputs, and a
clock input.
Input/OutputDIGITAL DATA & CONTROL
(DDC)
NI PXIe-5442
The NI 5442 is a PXI Express, 100 MS/s, 43 MHz, 16-bit arbitrary waveform generator with OSP. The
NI 5442 has four SMB connectors, as shown in the following gure. Signal descriptions are listed in
the following table.
©
National Instruments Corporation 19 NI Signal Generators Getting Started Guide

Related product manuals