© National Instruments Corp. 19 NI 9201/9221
Screw-terminal wiring ...................... 12 to 24 AWG copper
conductor wire with 10 mm
(0.39 in.) of insulation
stripped from the end
Torque for screw terminals ............... 0.5 to 0.6 N · m
(4.4 to 5.3 lb · in.)
Ferrules ............................................. 0.25 mm
2
to 2.5 mm
2
Weight
NI 9201/9221
with screw terminal .................... 150 g (5.3 oz)
NI 9201/9221 with DSUB.......... 145 g (5.1 oz)
Safety
Safety Voltages
Connect only voltages that are within the following limits.
Channel-to-COM .............................. ±60 VDC max
NI 9201/9221 with Screw Terminal Isolation Voltages
Channel-to-channel........................... None
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
