EasyManuals Logo

National Instruments NI 9217 Getting Started Guide

National Instruments NI 9217
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Caution The system shall only be used in an area of
not more than Pollution Degree 2, as defined in
IEC 60664-1.
Caution The system shall be mounted in an
ATEX/IECEx-certified enclosure with a minimum
ingress protection rating of at least IP54 as defined in
IEC/EN 60079-15.
Caution The enclosure must have a door or cover
accessible only by the use of a tool.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory
requirements and limits for electromagnetic compatibility (EMC)
stated in the product specifications. These requirements and
limits provide reasonable protection against harmful interference
when the product is operated in the intended operational
electromagnetic environment.
This product is intended for use in industrial locations. However,
harmful interference may occur in some installations, when the
product is connected to a peripheral device or test object, or if the
8 | ni.com | NI 9217 Getting Started Guide

Other manuals for National Instruments NI 9217

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the National Instruments NI 9217 and is the answer not in the manual?

National Instruments NI 9217 Specifications

General IconGeneral
BrandNational Instruments
ModelNI 9217
CategoryNetwork Card
LanguageEnglish