To Next PageTo Next Page
Need help?Do you have a question about the National Instruments NI 9375 and is the answer not in the manual?
General| Category | I/O Systems |
|---|---|
| Connector Type | 36-position spring terminal |
| Operating Temperature | -40 °C to 70 °C |
| Analog Input Resolution | 16 bits |
| Product Type | I/O Module |
| Analog Input Channels | 4 |
| Analog Input Max Sample Rate | 100 kS/s |
| Analog Output Channels | 4 |
| Digital Output Channels | 8 |
| Digital Logic Levels | TTL, CMOS |
| Channel Type | Differential or Single-Ended |
| Input Logic Levels | 5 V to 30 V |
| Maximum Input Voltage | 30 V |
| Isolation Voltage | 2500 Vrms |
| Sampling Rate | 100 kS/s |
Specifies voltage limits and isolation requirements for safe operation.
Provides guidelines for using the NI 9375 in hazardous environments.
Details specific EMC requirements and precautions for marine use.
Explains how to connect 2- and 3-wire sourcing-output devices.
Details connecting industrial devices like solenoids, motors, and lamps.
Guidance on installing a flyback diode for inductive loads.
Instructions and requirements for wire connections to spring terminals.
