NI 9860 Specifications
The following specifications are typical for the range -40 °C to
70 °C unless otherwise noted.
NI-XNET Host Port
...........................................................Connector type NI-XNET hardware
selectable interface port
...........................................................Port supported transceiver
cable types
NI-XNET transceiver cables
(CAN/LIN)
Note For more information about transceiver cables,
refer to the transceiver cable operating instructions.
Power Requirements
Power consumption from chassis
...................................................Active mode 1 W max
...................................................Sleep mode 5 mW max
12 | ni.com | NI 9860 Getting Started Guide
To Next Page
Loading...
