National Instruments GPIB-USB Series - User Manual

GPIB Hardware Guide
GPIB Hardware Guide
January 2013
370426L-01

National Instruments GPIB-USB Series Specifications

General

Bus Interface	USB
Dimensions	Varies by model
Weight	Varies by model
GPIB Standard	IEEE 488
Operating System	Linux
Compatibility	IEEE 488.1 and IEEE 488.2
Power Supply	Powered via USB

Summary

Important Information and Disclaimers

Critical Product Safety Warning

Important safety warning regarding the use of products in life-support or critical systems.

Compliance and Safety Standards

GPIB Hardware Installation

AT-GPIBTNT (PnP) Installation

Step-by-step guide for installing the AT-GPIB/TNT (PnP) interface card into a computer.

GPIB-USB Interface Installation

Instructions for installing GPIB-USB interfaces and preventing ground potential issues.

PCI and PCIe GPIB Interface Installation

Guide for installing NI PCIe-GPIB, PCI-GPIB, and PCI-8232 cards into expansion slots.

PCMCIA-GPIB Installation

Steps for installing the PCMCIA-GPIB interface into a PC Card socket.

NI ExpressCard-GPIB Installation

PMC-GPIB Installation

PXI-GPIB and PXI-8232 Installation

GPIB-ENET100 Installation and Configuration

Details installation, startup, software recognition, and network configuration for GPIB-ENET/100.

GPIB-ENET1000 Installation and Configuration

Details installation, startup, and network configuration for the GPIB-ENET/1000 device.

GPIB Hardware Specifications

Safety and EMC Compliance

Technical Support and Services

Support Resources and Knowledge Base

Guides users to access technical support, KnowledgeBase, and online forums.