National Instruments NI 9860 - Shock and Vibration; Electromagnetic Compatibility

Shock and Vibration
To meet these specifications, you must panel mount the system.
Operating vibration
...................................................Random (IEC
60068-2-64)
5 g
rms
, 10 Hz to 500 Hz
...................................................Sinusoidal (IEC
60068-2-6)
5 g, 10 Hz to 500 Hz
...........................................................Operating shock (IEC
60068-2-27)
30 g, 11 ms half sine; 50 g,
3 ms half sine;
18 shocks at 6 orientations
Electromagnetic Compatibility
This product meets the requirements of the following EMC
standards for electrical equipment for measurement, control, and
laboratory use:
• EN 61326 (IEC 61326): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
18 | ni.com | NI 9860 Getting Started Guide