National Instruments NI 9860 - Physical Characteristics

External Power Supply
1
(V
SUP
)
...................................................Voltage input range 9 to 30 VDC (measured at
the NI 9860 power
connector)
...................................................Power consumption 1.5 W max (active mode)
Caution Do not connect V
SUP
to a DC mains supply
or to any supply requiring a connecting cable longer
than 3 m (10 ft). A DC mains supply is a local DC
electricity supply network in the infrastructure of a site
or building.
...........................................................Total thermal dissipation
on module
1.2 W max (active mode)
Physical Characteristics
To clean the module, wipe it with a dry towel.
...........................................................Weight Approx. 144 g (5.0 oz)
1
Required to power NI-XNET Transceiver Cables.
NI 9860 Getting Started Guide | © National Instruments | 13