National Instruments NI 9860 User Manual

Note Measurement Categories CAT I and CAT O are
equivalent. These test and measurement circuits are not
intended for direct connection to the MAINS building
installations of Measurement Categories CAT II, CAT
III, or CAT IV.
Safety and Hazardous Locations Standards
This product is designed to meet the requirements of the
following electrical equipment safety standards for measurement,
control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
• EN 60079-0:2012, EN 60079-15:2010
• IEC 60079-0: Ed 6, IEC 60079-15; Ed 4
• UL 60079-0; Ed 5, UL 60079-15; Ed 3
• CSA 60079-0:2011, CSA 60079-15:2012
Note For UL and other safety certifications, refer to
the product label or the Online Product Certification
section.
NI 9860 Getting Started Guide | © National Instruments | 15

National Instruments NI 9860 Specifications

General

Brand	National Instruments
Model	NI 9860
Category	Recording Equipment
Language	English