National Instruments PXI-4110 User Manual

2 | ni.com | NI PXI-4110 Calibration Procedure
Software
To calibrate the NI 4110, you must install the NI-DCPower instrument driver version 1.0 or later
on the Windows calibration system. You can download NI-DCPower at
ni.com/downloads.
NI-DCPower supports programming an external calibration in the LabVIEW and C application
development environments (ADEs). When you install NI-DCPower, you need to install support
only for the application software that you intend to use.
LabVIEW support is in the
nidcpower.llb file, and all calibration VIs are accessible from
the NI-DCPower Calibration palette. For LabWindows
™
/CVI
™
users, the NI-DCPower function
panel (
nidcpower.fp) provides access to the calibration functions. Refer to Table 1 for file
locations.
Table 1. Calibration File Locations (NI-DCPower 1.0 or Later)
File Name and Location Description
IVI\Bin\nidcpower_32.dll NI-DCPower driver containing the entire
NI-DCPower API, including calibration
functions.
IVI\Lib\msc\nidcpower.lib NI-DCPower library for Microsoft C
containing the entire NI-DCPower API,
including calibration functions.
<LabVIEW>\instr.lib\niDCPower
Calibrate\nidcpower.llb
LabVIEW VI library containing VIs for
calling the NI-DCPower calibration API. You
can access calibration functions from the
NI-DCPower calibration section of the
LabVIEW function palette.
IVI\Drivers\niDCPower\
nidcpower.fp
LabWindows/CVI function panel file that
includes calibration function prototypes and
help on using NI-DCPower in the
LabWindows/CVI environment.
IVI\Include\nidcpower.h NI-DCPower header file, which you must
include in any C program accessing
calibration functions. This file includes the
entire NI-DCPower API, including calibration
functions.

National Instruments PXI-4110 Specifications

General

Brand	National Instruments
Model	PXI-4110
Category	Power Supply
Language	English