Table 1. AC Power Cables (Continued)
Power Cable Reference Standards
Australia 240 V AS C112
Universal Euro 230 V CEE (7), II, IV, VII
United Kingdom 230 V BS 1363
Japan 100 V JIS 8303
If you are missing any of the items, or if you have the incorrect AC power cable, contact
National Instruments
Key Features
The PXIe-1088 chassis combines a high-performance 9-slot PXI Express backplane with a
power supply and a structural design that has been optimized for maximum usability in a wide
range of applications. The PXIe-1088 chassis fully complies with the PXI-5 PXI Express
Hardware Specification.
The key features of the PXIe-1088 chassis include the following:
High Performance for Instrumentation Requirements
• Up to 500 MB/s or 2 GB/s (single direction) per PXI Express slot dedicated bandwidth
(x1 or x4 Gen-2 PCI Express).
– 3 hybrid peripheral slots connect as x4 links to the system slot.
– 5 hybrid peripheral slots connect as x1 links to a PCI Express switch, which
connects to the system slot through a x4 link.
• 58 W per slot cooling meets increased PXI Express cooling requirements. Refer to the
PXIe-1088 Specifications for more details.
• Low-jitter internal 10 MHz reference clock for PXI/PXI Express slots with ± 25 ppm
stability
• Low-jitter internal 100 MHz reference clock for PXI Express slots with ± 25 ppm
stability
• Quiet operation for 0 °C to 30 °C at 44.3 dBA
• Variable speed fan controller optimizes cooling and acoustic emissions
• Complies with PXI and CompactPCI specifications
High Reliability
• 0 °C to 50 °C temperature range
• Power supply, temperature, and fan monitoring
• Field replaceable fans
PXIe-1088 User Guide | © National Instruments | 3
To Next Page
Loading...
