EasyManuals Logo

National Instruments PXIe-1092 User Manual

National Instruments PXIe-1092
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Service Interval
Clean dust from the chassis exterior (and interior) as needed, based on the operating
environment. Periodic cleaning increases reliability.
Preparation
The information in this section is designed for use by qualified service personnel. Read the
Read Me First: Safety and Electromagnetic Compatibility document included with your kit
before attempting any procedures in this section.
Caution Many components within the chassis are susceptible to static discharge
damage. Service the chassis only in a static-free environment. Observe standard
handling precautions for static-sensitive devices while servicing the chassis. Always
wear a grounded wrist strap or equivalent while servicing the chassis.
Cleaning
Cleaning procedures consist of exterior and interior cleaning of the chassis and cleaning the
fan filters. Refer to your module's user documentation for information about cleaning
individual CompactPCI or PXI Express modules.
Caution Always disconnect the power cable prior to servicing the chassis.
Interior Cleaning
Use a dry, low-velocity stream of air to clean the interior of the chassis. Use a soft-bristle
brush for cleaning around components.
Exterior Cleaning
Clean the exterior surfaces of the chassis with a dry, lint-free cloth or a soft-bristle brush. If
any dirt remains, wipe with a cloth moistened in a mild soap solution. Remove any soap
residue by wiping with a cloth moistened with clear water. Do not use abrasive compounds on
any part of the chassis.
Caution Avoid getting moisture inside the chassis during exterior cleaning,
especially through the top vents. Use just enough moisture to dampen the cloth.
Do not wash the front- or rear-panel connectors or switches. Cover these
components while cleaning the chassis.
Do not use harsh chemical cleaning agents; they may damage the chassis. Avoid
chemicals that contain benzene, toluene, xylene, acetone, or similar solvents.
Replacing the Power Supply
This section describes how to remove, configure, and install the AC power supply in the
PXIe-1092 chassis.
PXIe-1092 User Guide | © National Instruments | 29

Other manuals for National Instruments PXIe-1092

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the National Instruments PXIe-1092 and is the answer not in the manual?

National Instruments PXIe-1092 Specifications

General IconGeneral
BrandNational Instruments
ModelPXIe-1092
CategoryChassis
LanguageEnglish

Related product manuals