Unpacking the Kit
Caution To prevent electrostatic discharge (ESD) from damaging the device,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution Never touch the exposed pins of connectors.
Note Do not install a device if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Kit Contents
Figure 1. NI 4136/4137 Kit Contents
1. NI PXIe-4136/4137 System SMU Device
2. Output Connector Assembly
3. Safety Interlock Input Connector
4. Driver Software DVD
5. NI PXIe-4136/4137 Getting Started Guide (this
document)
6. Maintain Forced-Air Cooling Note to Users
NI PXIe-4136/4137 Getting Started Guide | © National Instruments | 3
To Next Page
Loading...
Need help?
General
